top of page

SW-102D UV 125-525MHz   

V.S.W.R. meter Introduction

VSWR. Forward and reflected power direct digital readout, without any calibration.
Maximum measurable power range up to 120W.
low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Build in Frequency counter (SW102UV only) .
All Function display (  SWR,FW,RW,Battery Level)
Digital DMR ready

SW-102D-VU.jpg

Feature & Specification
Frequency range: 125 - 525MHz 
Measurable power range: 0.5 - 120W(+-0.5%)
Measurable S.W.R range: 1.00:1~19.99:1
Input  read frequency counter (must be < 0.5 W)
Maximum power: 120W
Impedance: 50Ω
Size: W 76 X H 77 X D35 mm.
Weight: < 220 grams
Battery : 3.7V Li-ion Rechargeable Battery

*Ready for the DMR radio.

Interface: N-J / SO239 Interface

PDF logo_png.png

Manual

quottaion.png
shopping.jpg

Shopping

 

Interface: N-J Interface/ SO239 
Ready for DMR radio

MAX. Power in :120 W         

V.S.W.R1.00 :1 ~ 19.99:1

Frequency Range COVER : 125MHz~525MHz SW102UV 

Insertion Loss< 0.15dB(VHF) , < 0.25dB(UHF)

Temperature 0℃~60℃

Frequency counter : Yes   

Battery Level Display : Yes

Battery Build-in :3.7V Li-ion Battery

Auto Power Off : 1-9 mins

Size: 76*77*35 (mm)

Charger in 5V (micro usb)

Back-light AUTO OFF  

Interface (in and out )N  / SO239 (SL16)

Weight: 220g (include battery)

 

  • Power ON/OFF:

Press [Red button] 2 second to power on or power off

MENU Display   


 Content:

1.LCD DIM (Back Light  Time)0-9  , "0" is always on,  1 min  to  9 mins

2.POWER OFF 0-9   "0" is always on,  1 min  to  9 mins
3. Adjustment  analog Time Base -99  to  +99 Frequency Counter ,O.S.C. Time Base

4  Adjustment VHF > 5W  Forward Power -99  to  +99 Fine Tune Level %
5. Adjustment UHF > 5W  Forward Power -99  to  +99 Fine Tune Level %
6. Adjustment VHF < 5W  Forward Power -99  to  +99 Fine Tune Level %
7. Adjustment UHF < 5W  Forward Power -99  to  +99 Fine Tune Level %
8.Adjustment DMR time Base -99  to  +99 Frequency Counter ,O.S.C. Time Base


* Supplier, the product will add functionality without having to give notice

 

  • Set & Save​:

  1. ​Press MENU [Blue button]

  2. Press F1 [Red button)(Select 1-5 Function)

  3. Press [Blue button] ( - ), [Yellow button] (+)

  4. Press the  [Red button ]for 2 seconds

  5. Press the  [Blue button] to SAVE and EXIT

 

  • How to check the S.W.R. of your Antenna :
    ​Connect to "TX" on Radio output  and Antenna  to "ANT".  Proper adapter /cable is required if your device has different type of connectors.

  1. Measurement V.S.W.R. : (see Pic.1)

  2. SW-102 TX connect Radio RF out  

  3. Radio TX , SW-102 with display S.W.R. measure data.
    Do not affect the test in the following cases, there are objects nearby, placed horizontally.

     

  • How to check the transceiver  RF output Watt :
    Cable Connect to "TX" on Radio output and dummy Load to "ANT".  Proper adapter /cable is required if your device has different type of connectors.

  1. Measurement Power: (see Pic.2)

  2. SW-102 TX connect Radio RF out  

  3. SW-102 ANT connect 50 ohm Dummy Load

  4. Push Radio TX , SW-102 display is Power  measure data.
     

  • How to display rotate : 

  1. Press Yellow key to rotate display in 180 degree , 

  2. Press Yellow key to normal .

 

  • Package Contents

  • 1x SURECOM  SW-102D-UV Power & S.W.R. Meter   

  • 1x Power PSU 100-240V

  • 1x Charger Cable 

  • 1x English Users Manual

If there is any change in the factory, there will be no further notice.

 


 

SW-102DMR-3.jpg
MODEL
FREQ. RANGE
CONNECTOR
FREQUENCY COUNTER
DMR
SW-102HF
1.5MHz -70MHz
SO239(SL16)
NO
NO
SW-102-UV
125MHz -525MHz
SO239(SL16) /N
YES
NO
SW-102D-UV
125MHz-525MHz
SO239(SL16) / N
YES
YES
SW-102-s-connector.jpg

N  - CONNECTOR 

SW102-S-connector.jpg

SO239 (SL-16)- CONNECTOR 

sw-102-how-to-swr (1).jpg
SW-102_connect.jpg
bottom of page