SW-102 UV 125-525MHz   

 

Interface: N-J Interface/ SO239 

MAX. Power in :120 W        (Measurable power,Radio must be ANALOG)

V.S.W.R1.00 :1 ~ 19.99:1

Frequency Range COVER : 125MHz~525MHz SW102UV 

Insertion Loss< 0.15dB(VHF) , < 0.25dB(UHF)

Temperature 0℃~60℃

Frequency counter : SW102UV only  (  TX input  must be minimum 0.5W + - 0.5%)

Battery Level Display : Yes

Battery Build-in :3.7V Li-ion Battery

Auto Power Off : 1-9 mins

Size: 76*77*35 (mm)

Charger in 5V (micro usb)

Back-light AUTO OFF  

Interface (in and out )N  / SO239 (SL16)

Weight: 220g (include battery)

 

• Power ON/OFF:

Press [Red button] 2 second to power on or power off

MENU Display  (Note: Version for up to V3.8)

Mode No.Item Adj 

Default Setting

 Content

1 Adjustment Forward Power -99  to  +99 Fine Tune Level %

2 Adjustment Reverse Power -99  to  +99 Fine Tune Level %

3 Adjustment Time Base -99  to  +99 Frequency Counter ,O.S.C. Time Base

4 LCD DIM (Back Light  Time)0-9  , "0" is always on,  1 min  to  9 mins

5 POWER OFF 0-9   "0" is always on,  1 min  to  9 mins

* Supplier, the product will add functionality without having to give notice

 

• Set & Save​:

1. ​Press MENU [Blue button]

2. Press F1 [Red button)(Select 1-5 Function)

3. Press [Blue button] ( - ), [Yellow button] (+)

4. Press the  [Red button ]for 2 seconds

5. Press the  [Blue button] to SAVE and EXIT

 

• How to check the S.W.R. of your Antenna :
  ​Connect to "TX" on Radio output  and Antenna  to "ANT".  Proper adapter /cable is required if your device has different type of connectors.

1. Measurement V.S.W.R. : (see Pic.1)

2. SW-102 TX connect Radio RF out  

3. Radio TX , SW-102 with display S.W.R. measure data.
   Do not affect the test in the following cases, there are objects nearby, placed horizontally.
    

• How to check the transceiver  RF output Watt :
  Cable Connect to "TX" on Radio output and dummy Load to "ANT".  Proper adapter /cable is required if your device has different type of connectors.

1. Measurement Power: (see Pic.2)

2. SW-102 TX connect Radio RF out  

3. SW-102 ANT connect 50 ohm Dummy Load

4. Push Radio TX , SW-102 display is Power  measure data.
   (SW-102 is not for D.M.R. system)
    

• How to display rotate : (up to Ver. 2.02 only )

1. Press Yellow key to rotate display in 180 degree , 

2. Press Yellow key to normal .

 

• Package Contents

• 1x SURECOM  SW-102-UV Power & S.W.R. Meter  (SO239/N - connector )

• 1x Power PSU 100-240V

• 1x Charger Cable 

• 1x English Users Manual

​

​

Version information of date: 
VER.3.3~V4.5      (P.C.B. 001) Production on   2016-2017    
VER.5.1               (P.C.B. 001) Production on   2017-2018   
VER.2.0 ~V2.03  (P.C.B. 002) Production on   2018-2020    
VER.2.06 ~2.08   (P.C.B. 002) Production on   2020-2021    
VER,2.4  ~V2.7   (P.C.B. 003) Production on   2021-  2024     

 

The first from : 
P.C.B. 001 (Old version )   V3.3,V3.8,V4.3, V4.5  can up to V5.1  .       
P.C.B. 002  V2.02,V2.03,V2.06 ,V2.07 ,V2.08    (Version V2.0  to V2.06 (is same V2.07  V2.08)..... , the watt meter refenece is best than  V3.3,V3.8,V4.3, V4.5,V5.1 .)
P.C.B. 003  V2.4 ~ V2.7  (New PCB design for S.W.R.)  .
(* V2.7 will be cancelled the efficiency % ,sorry for the inconvenience)

 

If there is any change in the factory, there will be no further notice.
 

​

​

​

​