Search Results

SW-102HF 1.5-70MHz V.S.W.R. meter Introduction V.S.W.R. Forward and reflected power direct digital readout, without any calibration. Maximum measurable power range up to 120W. low insertion loss (0.3 decibels or less) structure allows it to be permanently connected. All Function display ( S.W.R, F.W, R.W,Battery Level) Feature & Specification Frequency range: 1.5-70MHz Measurable power range: 0.5 - 120W(+-0.5%) Measurable S.W.R range: 1.00:1~19.99:1 Maximum power: 120W Impedance: 50Ω Size: W 76 X H 77 X D35 mm. Weight: < 220 grams Battery : 3.7V Li-ion Rechargeable Battery * Not for the digital radio. Interface: N-J Interface Manual Wholesale Quotation Shopping Interface: SO239 MAX. Power in :120 W V.S.W.R1.00 :1 ~ 19.99:1 Frequency Range COVER : 1.5MHz-70MHz Insertion Loss< 0.15dB(VHF) , < 0.25dB(UHF) Temperature 0℃~60℃ Battery Level Display : Yes Battery Build-in :3.7V Li-ion Battery Auto Power Off : 1-9 mins Size: 66*68*37 (mm) Charger in 5V (micro usb) Back-light AUTO OFF Interface (in and out ) SO239 (SL16) Weight: 220g (include battery) Power ON/OFF: Press [Red button] 2 second to power on or power off MENU Display Content 1 LCD (Back Light off Time)0-9 , "0" is always on, 1 min to 9 mins 2 POWER OFF 0-9 "0" is always on, 1 min to 9 mins 3 Adjustment Forward Power -99 to +99 Fine Tune Level % * Supplier, the product will add functionality without having to give notice Set & Save​: ​Press MENU [Blue button] Press F1 [Red button)(Select 1-3 Function) Press [Blue button] ( - ), [Yellow button] (+) Press the [Red button ]for 2 seconds Press the [Blue button] to SAVE and EXIT How to Connect your Radio : TX : Connect to RADIO RF Output ANT : Connect to ANTENNA or 50 OHM Dummy Load ( Proper adaptor/cable is required if .your device has different type of connectors.) How to charge your meter : Connect external USB DC+5V source (e.g. USB charger) to micro USB input When display is showing 'E', it means the unit is powered by USB. When display is showing 'B', it means the unit is powered by internal battery. How to use a swr meter to test antenna (SWR) : (pic 1) Measurement V.S.W.R. : ​1)Radio RF output connect to meter "TX" socket . 2)Antenna connect to meter "ANT" socket . 3)Push TX PTT from Radio, METER display is SWR measure data. How to use a meter to test the output Watt of your transceiver : Measurement Power: ​1)Radio RF output connect to meter "TX" socket . 2)50 Ohm Dummy connect to meter "ANT" socket . 3)Push TX PTT from Radio, METER display is Power measure data . How to rotate the display: Press Yellow button and hold to rotate display in 180 degree Package Contents 1x SURECOM SW-102-HF 1x Power PSU 100-240V 1x Charger Cable 1x English Users Manual ​ ​ ​ ​ ​ ​ N - CONNECTOR MODEL FREQ. RANGE CONNECTOR FREQUENCY COUNTER SW-102UV-N 125MHz -525MHz N-female YES SW-102UV-SO239 125MHz -525MHz SO239(SL16) YES SW-102HF 1.6MHz -70MHz SO239(SL16) NO If you have related videos, please share with us, please contact us

Repeater Cable Services This is your Services Page. It's a great opportunity to provide information about the services you provide. Double click on the text box to start editing your content and make sure to add all the relevant details you want to share with site visitors. 46-K This is a Paragraph. Click on "Edit Text" or double click on the text box to edit the content and make sure to add any relevant information that you want to share with your visitors. 46-M This is a Paragraph. Click on "Edit Text" or double click on the text box to edit the content and make sure to add any relevant information that you want to share with your visitors. 46-M This is a Paragraph. Click on "Edit Text" or double click on the text box to edit the content and make sure to add any relevant information that you want to share with your visitors. 46-MT This is a Paragraph. Click on "Edit Text" or double click on the text box to edit the content and make sure to add any relevant information that you want to share with your visitors. 46-S / 46-S2 This is a Paragraph. Click on "Edit Text" or double click on the text box to start editing the content. Service Name This is a Paragraph. Click on "Edit Text" or double click on the text box to edit the content and make sure to add any relevant information that you want to share with your visitors. People are genuinely interested in learning more about you, so don’t be afraid to share personal anecdotes to create a more friendly quality. Service Name This is a Paragraph. Click on "Edit Text" or double click on the text box to start editing the content.

SW-102 UV 125-525MHz V.S.W.R. meter Introduction VSWR. Forward and reflected power direct digital readout, without any calibration. Maximum measurable power range up to 120W. low insertion loss (0.3 decibels or less) structure allows it to be permanently connected. Build in Frequency counter (SW102UV only) . All Function display ( SWR,FW,RW,Battery Level) Feature & Specification Frequency range: 125 - 525MHz Measurable power range: 0.5 - 120W(+-0.5%) Measurable S.W.R range: 1.00:1~19.99:1 Input read frequency counter (must be < 0.5 W) Maximum power: 120W Impedance: 50Ω Size: W 76 X H 77 X D35 mm. Weight: < 220 grams Battery : 3.7V Li-ion Rechargeable Battery * Not for the digital radio. Interface: N-J / SO239 Interface Manual Wholesale Quotation Shopping Interface: N-J Interface/ SO239 MAX. Power in :120 W (Measurable power,Radio must be ANALOG) V.S.W.R1.00 :1 ~ 19.99:1 Frequency Range COVER : 125MHz~525MHz SW102UV Insertion Loss< 0.15dB(VHF) , < 0.25dB(UHF) Temperature 0℃~60℃ Frequency counter : SW102UV only ( TX input must be minimum 0.5W + - 0.5%) Battery Level Display : Yes Battery Build-in :3.7V Li-ion Battery Auto Power Off : 1-9 mins Size: 66*68*37 (mm) Charger in 5V (micro usb) Back-light AUTO OFF Interface (in and out )N / SO239 (SL16) Weight: 220g (include battery) Power ON/OFF: Press [Red button] 2 second to power on or power off MENU Display (Note: Version for up to V3.8) Mode No.Item Adj Default Setting Content 1 Adjustment Forward Power -99 to +99 Fine Tune Level % 2 Adjustment Reverse Power -99 to +99 Fine Tune Level % 3 Adjustment Time Base -99 to +99 Frequency Counter ,O.S.C. Time Base 4 LCD DIM (Back Light Time)0-9 , "0" is always on, 1 min to 9 mins 5 POWER OFF 0-9 "0" is always on, 1 min to 9 mins * Supplier, the product will add functionality without having to give notice Set & Save​: ​Press MENU [Blue button] Press F1 [Red button)(Select 1-5 Function) Press [Blue button] ( - ), [Yellow button] (+) Press the [Red button ]for 2 seconds Press the [Blue button] to SAVE and EXIT How to check the S.W.R. of your Antenna : ​Connect to "TX" on Radio output and Antenna to "ANT". Proper adapter /cable is required if your device has different type of connectors. Measurement V.S.W.R. : (see Pic.1) SW-102 TX connect Radio RF out Radio TX , SW-102 with display S.W.R. measure data. Do not affect the test in the following cases, there are objects nearby, placed horizontally. How to check the transceiver RF output Watt : Cable Connect to "TX" on Radio output and dummy Load to "ANT". Proper adapter /cable is required if your device has different type of connectors. Measurement Power: (see Pic.2) SW-102 TX connect Radio RF out SW-102 ANT connect 50 ohm Dummy Load Push Radio TX , SW-102 display is Power measure data. (SW-102 is not for D.M.R. system) How to display rotate : (up to Ver. 2.02 only ) Press Yellow key to rotate display in 180 degree , Press Yellow key to normal . Package Contents 1x SURECOM SW-102-UV Power & S.W.R. Meter (N - connector) 1x Power PSU 100-240V 1x Charger Cable 1x English Users Manual ​ ​ Version information of date: VER.3.3~V4.5 (P.C.B. 001) Production on 2016-2017 VER.5.1 (P.C.B. 001) Production on 2017-2018 VER.2.0 ~V2.03 (P.C.B. 002) Production on 2018-2020 VER.2.06 ~2.08 (P.C.B. 002) Production on 2020-2021 VER,2.4 ~V2.7 (P.C.B. 003) Production on 2021- 2023 The first from : P.C.B. 001 (Old version ) V3.3,V3.8,V4.3, V4.5 can up to V5.1 . P.C.B. 002 V2.02,V2.03,V2.06 ,V2.07 ,V2.08 (Version V2.0 to V2.06 (is same V2.07 V2.08)..... , the watt meter refenece is best than V3.3,V3.8,V4.3, V4.5,V5.1 .) P.C.B. 003 V2.4 ~ V2.7 (New PCB design for S.W.R.) . (* V2.7 will be cancelled the efficiency % ,sorry for the inconvenience) If there is any change in the factory, there will be no further notice. ​ ​ ​ ​ MODEL FREQ. RANGE CONNECTOR FREQUENCY COUNTER SW-102UV-N 125MHz -525MHz N-female YES SW-102UV-SO239 125MHz -525MHz SO239(SL16) YES SW-102HF 1.6MHz -70MHz SO239(SL16) NO N - CONNECTOR SO239 (SL-16)- CONNECTOR If you have related videos, please share with us, please contact us

41-99 Bluetooth Speaker Microphone FOR Inrico T320 T298 Description ​ Bluetooth microphone is a kind of professional intercom equipment by connecting APP of smart phoneornetwork radio, providing truly secure link, easy paining on the go, and instant push-to-talk The Bluetooth microphone, as wireless accessory, is flexible and cost-effective that gives users more mobilifty in their critical communication. Manual Wholesale Quotation Shopping Operation 1. Power on/power off In power off state, press Power on/off button and hold it for about 2 seconds, until hear a "beep" tone, release the button, blue indicator will flash to indicate power on successfully. In power on state, press Power on/off button and hold it for about 8 seconds, until hear a long "beep" tone, all LED indicators will be shut off to indicate the Bluetooth microphone is been powered off. 2. Pairing with bluetooth adaptor for two way radio 1.In the power off state, long press microphone power on/off button for 8s, indicator into red and blue flash alternately. 2.In the power off state, long press bluetooth adapter power on/off button for 8s, indicator into red and blue flash alternately. 3. When both BT mic and BT adapter red and blue indicator turn to blue flash slowly, pairing success. 4. Now you can press H3 PTT button to control radio and talk. 3. Paring H3 with smart phones 1. In the power off state, long press microphone "power on/off" button for 8s, indicator will flash red and blue alternately (For Android phone, press Volume- into solid red and blue indicators flash paring mode). 2. Open mobile phone Bluetooth set, then search device, when device name "Dellking PTT Mic" appears, just choose it and pair, when the Bluetooth microphone red and blue indicators turn into slowly blue indicator flash, then pairing successful. Note: Please remind, when the PTT mic connect with cellphone, use APP to do follow setting. See more detail in user manual. 4. Stereo music play control and Volume control See more detail in user manual. Compatible: Android Iniro T320 SURECOM R7 * Not fit for SenHaiX N60 * PTT not support I-phone Package includes: 1 x Bluetooth Speaker Mic 1 x Charger 1 x USB Cable 1 x English user manual If you have related videos, please share with us, please contact us

Commercial and professional mobile radios are often purchased from an equipment supplier or dealer whose staff will install the equipment into the user's vehicles. Large fleet users may buy radios directly from an equipment manufacturer and may even employ their own technical staff for installation and maintenance. MOBILE RADIO S-KT7900D Technical Parameter ● Measurement Frequency: 132-173 / 200-260 / 400-519MHz ● Display: 2.2 inch TFT (320 x240) ● RF Output: 1-1.15V (±5-10db) ● Span width: 0.54MHz /1.35MHz /2.7MHz /5.4MHz /10.8MHz /27MHz / 54MHz / 108MHz / 216MHz / 432MHz ● Port SWR: < 1.1 ● Display: 2.2inch TFT (320 x240) ● Size: 70mm x 120mm x 25mm ● Weight: 172 grams Read More S-KT-8900D Technical Parameter ● Measurement Frequency: 132-173 / 200-260 / 400-519MHz ● Display: 2.2 inch TFT (320 x240) ● RF Output: 1-1.15V (±5-10db) ● Span width: 0.54MHz /1.35MHz /2.7MHz /5.4MHz /10.8MHz /27MHz / 54MHz / 108MHz / 216MHz / 432MHz ● Port SWR: < 1.1 ● Display: 2.2inch TFT (320 x240) ● Size: 70mm x 120mm x 25mm ● Weight: 172 grams Read More S-KT980PLUS SURECOM S-KT-980 Plus Colorful Screen Compact Car Features: 1. Dual Band136~174VHF/400~480UHF Trasceiver 2. Compact and rigid car radio with colorful screen 3. 5Tone 2Tone ANI DTMF function 4. Remote Stun, Remote Kill, Remote Revive 5. High power output 75W on VHF and 55W on UHF 6. External speaker/PTT Specification: General 1. Frequency Range:VHF:136-174MHz UHF:400-480MHz 2. Number of Channel:200 3.Channel Spacing:25KHz 20K 12.5K Read More

SS-10 The SS-10 Field Strength Meter is ideal for reading relative field strength from your antenna. It is a compact unit that fits in the palm of your hand and can be taken anywhere. The best part of using it is that you now can tell if your antenna is radiating or not by simply holding the unit near your antenna and adjusting the sensitivity. Also, by taking measurements, you can find out relatively how strong your antenna field is. Operation The SS-10 Field Strength Meter is very simple to use. It requires no power because your antenna field provides the power necessary to run the meter. Simply raise the single whip antenna on your unit, stand several feet away, and adjust the sensitivity knob on the front, it’s that easy. You want to ensure that the whip antenna is parallel with the polarity of the antenna you are reading. Now you can read the relative field strength of your antenna. Features: The appearance is simple and efficient, beautiful and generous. Frequency bandwidth, high sensitivity. 100KHz-3000MHz (with antenna ), please use different frequency antennas to test signals with different frequencies for better effect and sensitivity) The pointer amplitude can be adjusted (to protect the meter) Built-in automatic damping function, which is the buffer function, prevents the needle from swinging too fast and causing damage. Small size, easy to carry, size: 75 x 100 x 64mm (excluding the raised antenna part) Manual Wholesale Quotation Shopping Key Specifications: Test suitable antenna for walkie-talkie use Frequency bandwidth, high sensitivity. 100KHz-3000MHz Measurement Radio Field Strength The pointer amplitude can be adjusted (to protect the meter) Specifications: Model No. SS-10 Frequency Range: 100KHz -3GHz Size without Socket : 75 x 100 x 64mm Antenna (in ) Interface: SMA Female Net Weight : 240g (not include antenna) Package include 1x SS-10 Field Strength Meter 1x SMA MALE UHF Telescopic Antenna 1x English Instructions ​ INTRODUCTION: The SS-10 Field Strength Meter is ideal for reading relative field strength from your antenna. It is a compact unit that fits in the palm of your hand and can be taken anywhere. The best part of using it is that you now can tell if your antenna is radiating or not by simply holding the unit near your antenna and adjusting the sensitivity. Also, by taking measurements, you can find out relatively how strong your antenna field is. Operation The SS-10 Field Strength Meter is very simple to use. It requires no power because your antenna field provides the power necessary to run the meter. Simply raise the single whip antenna on your unit, stand several feet away, and adjust the sensitivity knob on the front, it’s that easy. You want to ensure that the whip antenna is parallel with the polarity of the antenna you are reading. Now you can read the relative field strength of your antenna. Technical Assistance If you have any problem with this unit first check the appropriate section of this manual. If the manual does not reference your problem or your problem is not solved by reading the manual you may call SURECOM Technical Service at 852-54457217. You will be best helped if you have your unit, manual and all information on your station handy so you can answer any questions the technicians may ask. You can also send questions by mail to SURECOM.COM.HK Features: The appearance is simple and efficient, beautiful and generous. Frequency bandwidth, high sensitivity. 100KHz-3000MHz (with antenna ), please use different frequency antennas to test signals with different frequencies for better effect and sensitivity) The pointer amplitude can be adjusted (to protect the meter) Built-in automatic damping function, which is the buffer function, prevents the needle from swinging too fast and causing damage. Small size, easy to carry, size: 75 x 100 x 64mm (excluding the raised antenna part) Instructions for use: Before use, please rotate the "amplitude adjustment" to the left most end. The length of the antenna to be pulled depends on the frequency of the test. It is better to have 1/4 wave as much as possible. The handheld walkie-talkie is about one meter away from the field strength meter. Don't be too close! In order to avoid the signal is too strong to burn the field strength meter! Then press the walkie-talkie PTT button to make the walkie-talkie enter the launch state. At this time, the pointer of the field strength meter should have a signal indication. The stronger the signal, the greater the indication! Amplitude adjustment: If the field strength indicator indicates that the maximum range is exceeded, the "amplitude adjustment" can be adjusted to let the pointer indicate the appropriate position. Method for testing the maximum gain point of an antenna 1. In order to change the frequency conveniently and quickly, you should use the keyboard to set the frequency walkie-talkie manually. 2. Link the walkie-talkie and antenna feeders, place the field strength meter near the antenna (depending on the environment), place it within the vertical radiation angle of the antenna as much as possible, and the antenna planning method is best. 3. Set the frequency of the walkie-talkie, press the launch button, observe the meter reading, and register the meter reading. Then set the walkie-talkie to other frequency points, let the walkie-talkie enter the launch state again, observe the meter reading and then compare the readings of each frequency point! You can know the best frequency/segment of the antenna under test! ​ ​ A typical field-strength meter is shown in Figure 1. This is a simple passive (unpowered) circuit in which radio frequency energy is intercepted by the antenna, rectified to DC, and then used to directly drive the meter. The maximum sensitivity of this circuit is based primarily on several factors: The gain of the antenna: How much of the signal is actually intercepted. The sensitivity of the meter movement being used. The nature of the diodes being used. If you have related videos, please share with us, please contact us

SA-250 SA-250 antenna analyzer designed for testing, checking, tuning or repairing antennas and antenna feed lines.Mainly, these are S.W.R. (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers).Easy-to use measurement modes. make SURECOM attractive for professionals and hobbyists. It is important that graphical display of various parameters over a wide frequency range is a key feature of these analyzer which significantly reduces the time required to adjust an antenna. Main Features: ■ 2.2 ” precision LCD screen,High-lumen LCD brightness, easy to read in direct sunlight ■ Heavy duty Aluminum enclosure,strong anti-interference ability. ■ Very compact and convenient for field use ■ Built-in rechargeable Li-ion battery ■ Full Band control (No need select Band ) ■ Easy setup, only four control buttons with convenient on-screen soft menus ■ Constant Battery Status Indicator and Auto Shut-off ■ Built-in timer shows elapsed time when unit is turned on ■ High efficiency IC, low power consumption, the longest working hours ■ More choice measurement frequency Span . ■ One button quick scan mode (V1,V2,U) or 3 band by full screen. ■ Auto marker the Best s.w.r. level reference Manual Wholesale Quotation Shopping Specifications: Model No. SA-250 Frequency Range: 132-173MHz / 200-260MHz / 400-519MHz Connector: SMA-Female (50 OHM) RF Output Power: 1-1.5V (5 - 10dB) Frequency Step: 0.1 / 1 / 10 / 100 / 1000KHz V.S.W.R. Range: 1.00-19.99 Deviation: ±0.1 ZRX Range: 0-99.9 Build-in Battery : 3.7V 900mah ,Li-ion 14500 Voltage input : DC5V> 500mA Frequency stability: < 0.5PPM Span width: 0.54MHz /1.35MHz /2.7MHz /5.4MHz /10.8MHz / 27MHz / 54MHz / 108MHz / 216MHz / 432MHz Charger indicator: Two-color LED Hidden (when not charging) there are three instructions state: 1, charging (red) ; 2, charging is completed (green) 3, Battery fault (flashing) Charger Plug: Standard Micro USB connector Size: 70 x 120 x 25 mm Colour Display: TFT LCD 320 x 240 pixels Weight: 172g Power Source: Built-in 3.7V, 900-mAh ,Size 14500 of Lithium battery. Charge Controller: Smart charger, LED charging-status indicator Voltage Monitor: On-screen DVM, plus battery condition icon Charger Source: Any USB port, analyzer accepts Micro-USB plug Power Savers: Auto-off timer, Auto Run/Stop RF generator control Interface RF Connector: SMA-female , (optional PL-259 ,N connector need adapter) Battery Charge Connector: Micro-USB Screen: 2.2 inch high-output color TFT Function Keys : 4 button, with on-screen (soft-menu) identifiers Tuning: Rotary encoder with press-in tuning-step choice Weight and Dimensions Case: Aluminum metal Size: 2.8" wide x 4.0" high x 1.0" deep (7 cm x12 x 2.5 cm) ​Weight: 6.1 oz (0.172 kg) PACKAGE CONTAIN: 1 x SURECOM SA250 (ENGLISH VERSION) Colour Graphic Antenna Analyzer 1 x English User"s Manual 1 x Mirco Usb Charger Cable 1 x AC Adapter 100-240V (Depends on your country) 1x SMA- SO239 adaptor 1x SMA to BNC Adaptor 1x SMA to SMA adaptor ​ ​ SA-250 How to Use 1.0 Turn on and Turn off the power Turn on the power, Press and hold White botton when the dot disappear from left up angle ,. top Menu appeared on the screen. Turn off the power, You have 2 method : a) On Top Menu page ,Press and hold the White [F1 ] botton 5 second . b) On Top Menu page , Rotary encoder on "Power off", Press the [F2 Enter] 1.1Function Select (Please see Pic.1) You can turn the knob select you want function and press [F2.Enter] botton . 2.0 ANTENNA TEST EXAMPLES (Scan mode): (Please see Pic.2) In the Top Menu screen: Rotary encoder on "Scan", Press the [F2 Scan] to frequency mode measurement button, enter Scan­ (scan mode) screen. Press [F.2 scan ],button to start the scan operation. During scanning, in order to ensure measurement accuracy, each frequency will stay for short while. one scanning cycle will take about 1-2 seconds. Once SCAN is done, it will enter ”Present” mode (result) screen You have results on the screen : Show the SWR curve only (because default setting SWR curve only , Zx curve, Rs curve, jx curve Disable) You can Enable other curve on the screen: On Top Menu page, Rotary encoder on "Zx", Press the [F2 Enter] to enable . (Please see Pic.1) Other cure will Disable when Power Off , If want enable in the future, Rotary encoder on "Save", Press the [F2 Enter] to save setting .(Please see Pic.1) 2.1 Move the curso marker: (Please see Pic.3) View the scan frequency point on the curve on each scan of the specific parameters of the measurement results. Press the [F3.View ] button to start the view operation mode. rotary encoder ,the white triangle curve marker is move Dot scale will display on screen, Press bottom change the Dot scale,You have 3 options of Dot scale mode for choose, [Dot =x1][Dot =x10][Dot= x25] . SWR Full scale will display on screen,Press bottom change the graphically plot SWR,You have 3 options scale mode for choose, [SWR=x2 ][SWR= x 0.5][SWR=x1] . 2.2 Quick 1 start Scan mode: (Please see Pic.4) Quick view the scan frequency point on the curve on each scan Press the button [Quick 1 ] to start the Quick 1 operation mode .You have 3 options scan mode for choose . Press the button [F1 Scan V1 ] . 132 to 174 MHZ can of the specific parameters of the measurement results. Press the button [F1 Scan V2 ]. 200 to 260 MHZ can of the specific parameters of the measurement results. Press the button [F1 Scan U ] . 400 to 519 MHZ can of the specific parameters of the measurement results. 2.3 Quick 2 start Scan mode: (Please see Pic.5) Quick view the Full band scan frequency point on the curve on each scan Press the [Q2 ] button to start the Quick 2 operation scan mode. Press the [ScanFull ] button to start the 3 BAND (132-174,200-260,400-519MHz )Scan operation mode. the measurement results. after you have 2 options mode for choose . Press the [Scan2 Mk ] button to read the best SWR Yellow triangle curve marker .( operation Span 108MHz) Press the [MoveCur ] button ,Nearby the best SWR Yellow triangle curve marker, Move right hand side .Press again move left hand side. 3.0 ANTENNA TEST EXAMPLES (Single mode): (Please see Pic.7) In the Top Menu screen: Rotary encoder on "Single", Press botton "F2" single ­frequency mode measurement button, enter single­ (single scan mode) screen. a) Rotary encoder potentiometer enter the center frequency, the specific reference to the above operation "SCAN" sweep measurement mode descriptions. b) Press the ”F2 scan", to start the scan for one time . Single ­frequency mode provides a single frequency impedance measurement, the measured frequency of the basic parameters are displayed on the screen. And to indicate the form of bars and numbers displayed on the screen quickly. The scanning one time , will stop, until you press the F2 Scan button or rotary encoder potentiometer enter the center frequency. In this mode, it can be used as an accurate signal generator, please refer to RF out. If you have related videos, please share with us, please contact us

POC WALKIE-TALKIE S1 Surecom S1 4G network walkie-talkie Features: Brand: SURECOM Model: S1 Type: Handheld Communication software: 409PTT cluster digital communication system Network reception: 4G/3G/2G GPS positioning function: Yes Audio Record : YES Function: Calling by the crowd, calling individually. Monitoring group Headphone jack: (3.5mm) Body charging interface: TYPE-C Working time: about 12 hours Standby time: about 50 hours Battery capacity: 4200mAh Working voltage: 3.7V lithium ion Working temperature: -20°C~+60°C Size: 94 * 49 * 27mm Weight: 152g Read More H5C-V8 Surecom H5V8 4G LTE Mini Android Walkie Talkie Color LCD Network Walkie Talkie Use platform: 409PTT / RealPTT Network reception: 4G/3G/2G GPS positioning function: Yes Function: Calling by the crowd, calling individually. Monitoring group Headphone jack: 3.5mm Plug (use 4-006H5 /4-004H5, but not included) Body charging interface: TYPE-C Working time: about 12 hours Standby time: about 28 hours Battery capacity: 4500mAh Working voltage: 3.7V~4.2V lithium ion Working temperature: -20°C~+60°C Size: 100 x 55 x 30mm (excluding the protruding antenna part) Weight: 190g Read More Z9-PLUS Surecom Z9-PLUS 4G LTE Walkie Talkie Color LCD Use platform: : 409PTT / RealPTT / ZELLO Network reception: 4G/3G/2G Other reception: WIFI Bluetooth: Yes GPS positioning function: Yes Audio Record : Yes Function: Calling by the crowd, calling individually. Monitoring group Headphone jack: Kenwood type Body charging interface: 3.5mm x 1.7mm Working time: about 24 hours Standby time: about 48 hours Battery capacity: 4500mAh Working voltage: 3.7V~4.2V lithium ion Working temperature: -20°C~+60°C Size: 125 x 57 x 40mm (excluding the protruding antenna part) Weight: 249g Read More R7 SURECOM R7 (Premium Version) 4G LTE WI-FI Bluetooth Walkie Talkie Color LCD Network Walkie Talkie Use platform: 409PT T/ REAL PTT Network reception: 4G/3G/2G Other reception: WIFI Bluetooth: included Headphone jack: R7 3.5mm Body charging interface: TYPE-C Standby time: 12-18 Working time: about 30 hours Specification: Battery capacity: 6800mAh Working voltage: 3.7V~4.2V lithium ion Working temperature: -30°C~+60°C Size: 134 * 62 * 41mm Weight: 290g Waterproof level: IP54 Read More P-808 Surecom P808 4G LTE WaterProof walkie Talkie Use platform: : 409PTT / RealPTT Network reception: 4G/3G/2G GPS positioning function: Yes Function: Calling by the crowd, calling individually. Monitoring group Headphone jack: GP88 type Body charging interface: Desktop charger Working time: about 12 hours Standby time: about 24 hours Battery capacity: 6800mAh Working voltage: 3.7V~4.2V lithium ion Working temperature: -20°C~+60°C Size: 170 x 70 x 50mm (excluding the protruding antenna part) Weight: 321g Waterproof level: IP67 Read More S-GT100-4G Surecom S-GT100 Car network walkie-talkie Features: Brand: SURECOM Model: S-GT-100-4G Type: Handheld Communication software: 409PTT / Real PTT Network reception: 4G/3G/2G GPS positioning function: Yes Function: Calling by the crowd, calling individually. Monitoring group Battery capacity: 4200mAh Working voltage: 12-36V Working temperature: -20°C~+60°C Size: 120 x 95 x 38 mm Weight: 280g Read More T3 SURECOM T3 4G LTE WI-FI Bluetooth GPS color LCD network walkie-talkie ​ Features:Mini, bluetooth, wi-fi, kenwood headphone connector Type: Handheld Communication software: 409PTT NETWORK SYSTEM Network reception: 4G/3G/2G Other reception: WIFI Bluetooth: Yes GPS positioning function: Yes Function: Calling by the crowd, calling individually. Monitoring group Headphone jack: KENWOOD (3.5+2.5mm) Body charging interface: TYPE-C Working time: about 12 hours Standby time: about 28 hours Battery capacity: 4800mAh Working temperature: -20°C~+60°C Size: 91 * 62 * 32mm Weight: 170g Read More

ANTENNA ANALYZER An antenna analyzer ' (also known as a noise bridge, RX bridge, SWR analyzer, or RF analyzer) is a device used for measuring the input impedance of antenna systems in radio electronics applications. SA160 Technical Parameter ● Measurement Frequency: 132-173 / 200-260 / 400-519MHz ● Display: 2.2 inch TFT (320 x240) ● RF Output: 1-1.15V (±5-10db) ● Span width: 0.54MHz /1.35MHz /2.7MHz /5.4MHz /10.8MHz /27MHz / 54MHz / 108MHz / 216MHz / 432MHz ● Port SWR: < 1.1 ● Display: 2.2inch TFT (320 x240) ● Size: 70mm x 120mm x 25mm ● Weight: 172 grams MORE INFORMATION SA-250 Technical Parameter ● Measurement Frequency: 132-173 / 200-260 / 400-519MHz ● Display: 2.2 inch TFT (320 x240) ● RF Output: 1-1.15V (±5-10db) ● Span width: 0.54MHz /1.35MHz /2.7MHz /5.4MHz /10.8MHz /27MHz / 54MHz / 108MHz / 216MHz / 432MHz ● Port SWR: < 1.1 ● Display: 2.2inch TFT (320 x240) ● Size: 70mm x 120mm x 25mm ● Weight: 172 grams VISIT WEBSITE MINI1300 Specification: Frequency Range: 0.1-1300MHz HF/VHF/UHF contiunous coverage In/Out Impedance: 50 Measurement Parameters: SWR, R, +Jx, -Jx, |Z|, Returnloss Measurement Mode: Single point measurement, Scanning (Frequency Sweep), and TDR Mode SWR MeasureMent Range: 1.0-1999（Single Point Mode), 1.0-20.0 (Scan Mode) Display Modes: Numerical display, curve display, simith chart Connector Type: UHF N-type connector VNA:SMA SMA OPEN-SHORT-LOAD Calibration Kit x 1 LCD size: 480x272 4.3" TFT LCD display Touch Screen Type: Capacitive VISIT WEBSITE SA-350 Technical Parameter ● Measurement Frequency: 132-173 / 200-260 / 400-519MHz ● Display: 2.2 inch TFT (320 x240) ● RF Output: 1-1.15V (±5-10db) ● Span width: 0.54MHz /1.35MHz /2.7MHz /5.4MHz /10.8MHz /27MHz / 54MHz / 108MHz / 216MHz / 432MHz ● Port SWR: < 1.1 ● Display: 2.2inch TFT (320 x240) ● Size: 70mm x 120mm x 25mm ● Weight: 172 grams VISIT WEBSITE ANTENNA ANALYZER Quick View SURECOM Mini1300 0.1-1300MHz SWR Meter Antenna Analyzer Price $255.50 Quick View Antenna Analyzer SA250 132-173 200-260 400-519MHz Price $175.00 Quick View SURECOM ANTENNA ANALYZER SA-160 0.5-60MHz Colour Graphic Price $195.00

Company Description SURECOM LIMITED is a manufacturing department of a professional enterprise providing two-way radio accessories. For years, we have been committed to developing products according to domestic and overseas markets' demands. Our full range of products include repeater and radio equipment. We also provide customized solutions for customers depending on their requirements. Our products have been exported to Europe, America and Southeast Asia, enjoying high popularity. We always persist in new and unique development and strictly follow the quality standard. Our materials are selected through selection process. As a leading department with innovative technology, we are proud of offering good quality products, low prices and better selections, as well as prompt and reliable services to our customers. IN THE NEWS I AM A PARAGRAPH I'm a paragraph. Click here to add your own text and edit me. It’s easy. Just click “Edit Text” or double click me and you can start adding your own content and make changes to the font. Feel free to drag and drop me anywhere you like on your page. I AM A PARAGRAPH I'm a paragraph. Click here to add your own text and edit me. It’s easy. Just click “Edit Text” or double click me and you can start adding your own content and make changes to the font. Feel free to drag and drop me anywhere you like on your page. I AM A PARAGRAPH I'm a paragraph. Click here to add your own text and edit me. It’s easy. Just click “Edit Text” or double click me and you can start adding your own content and make changes to the font. Feel free to drag and drop me anywhere you like on your page. LAST EVENT I'm a paragraph. Click here to add your own text and edit me. It’s easy. Just click “Edit Text” or double click me and you can start adding your own content and make changes to the font. Feel free to drag and drop me anywhere you like on your page. I’m a great place for you to tell a story and let your users know a little more about you. PARTNERS COMPANY NAME I'm a paragraph. Click here to add your own text and edit me. COMPANY NAME I'm a paragraph. Click here to add your own text and edit me. COMPANY NAME I'm a paragraph. Click here to add your own text and edit me.

POC ACCESSORY Accessories empower409PTT Zello users to talk safely behind the wheel and clearly in loud environments. All accessories come with dedicated push-to-talk buttons.We have tested them all, and are confident that they are compatible with our push-to-talk apps....... SA160 Technical Parameter ● Measurement Frequency: 132-173 / 200-260 / 400-519MHz ● Display: 2.2 inch TFT (320 x240) ● RF Output: 1-1.15V (±5-10db) ● Span width: 0.54MHz /1.35MHz /2.7MHz /5.4MHz /10.8MHz /27MHz / 54MHz / 108MHz / 216MHz / 432MHz ● Port SWR: < 1.1 ● Display: 2.2inch TFT (320 x240) ● Size: 70mm x 120mm x 25mm ● Weight: 172 grams Read More SA-250 Technical Parameter ● Measurement Frequency: 132-173 / 200-260 / 400-519MHz ● Display: 2.2 inch TFT (320 x240) ● RF Output: 1-1.15V (±5-10db) ● Span width: 0.54MHz /1.35MHz /2.7MHz /5.4MHz /10.8MHz /27MHz / 54MHz / 108MHz / 216MHz / 432MHz ● Port SWR: < 1.1 ● Display: 2.2inch TFT (320 x240) ● Size: 70mm x 120mm x 25mm ● Weight: 172 grams Read More SA-350 Technical Parameter ● Measurement Frequency: 132-173 / 200-260 / 400-519MHz ● Display: 2.2 inch TFT (320 x240) ● RF Output: 1-1.15V (±5-10db) ● Span width: 0.54MHz /1.35MHz /2.7MHz /5.4MHz /10.8MHz /27MHz / 54MHz / 108MHz / 216MHz / 432MHz ● Port SWR: < 1.1 ● Display: 2.2inch TFT (320 x240) ● Size: 70mm x 120mm x 25mm ● Weight: 172 grams Read More MINI1300 Specification: Frequency Range: 0.1-1300MHz HF/VHF/UHF contiunous coverage In/Out Impedance: 50 Measurement Parameters: SWR, R, +Jx, -Jx, |Z|, Returnloss Measurement Mode: Single point measurement, Scanning (Frequency Sweep), and TDR Mode SWR MeasureMent Range: 1.0-1999（Single Point Mode), 1.0-20.0 (Scan Mode) Display Modes: Numerical display, curve display, simith chart Connector Type: UHF N-type connector VNA:SMA SMA OPEN-SHORT-LOAD Calibration Kit x 1 LCD size: 480x272 4.3" TFT LCD display Touch Screen Type: Capacitive Read More

SKT-7900D SURECOM KT-7900D DUAL BAND MINI MOBILE RADIO General specification Frequency Range : VHF:136-174MHz UHF： 400-480MHz Number of channels : 200 Channel spacing : 25KHz、 20K、12.5 Phase lock step step : 2.5KHz、5KHz、6.25 KHz、10 KHz、12.5 KHz、15 KHz、25 KHz Working voltage : 13.8V DC±15% Squelch way : CTCSS、DCS、5Tone、2Tone、DTMF Frequency stability : ±2.6ppm Operat temperature : -20+60℃ Dimension : 98(W)*43(H)*126(D)mm Weight : 448g Manual Wholesale Quotation Shopping PACKAGE CONTAIN: 1 x SURECOM KT-8900D 136-174/220-260/350-390/400-480 MINI COLOR SCREEN MOBILE RADIO 1 x Microphone 1 x Car Power Cable 1 x Fuse 1 x Mounting bracket 1 x Screw 1 x User"s Manual If you have related videos, please share with us, please contact us

S-CB27 s-CB27 is a multi-norms AM/FM citizen band mobile radio,with colorful TFT LCD screen,maximum 40channels, 6 programmable keypad mapped to onscreen 6 functions,bring you new feeling of visual era. Main Features : *TFT LCD color display *8 Memory Channel *50 CTCSS/104DCS *Dual watch function *AM/FM mode switchable *Receive gain adjustable *Emergency channel CH9/CH19 *6 Programmable key *Scan /Beep *Automatic/Manual squelch *Channel/frequency display mode *PC programmable &password *DTMF function *Time out time *Automatic power on *Keypad lock *Mute function *NB/ANL function Manual Wholesale Quotation Shopping General Specification Modulation mode : AM/FM Frequency Range : 26.965-27.405MHz Channel : 40 Power Output : 4W AM/FM Input voltage : 12/24V Dimension (H x W x D) : 159*123*48mm Weight : 672g ​ Package Contains: 1 x CB-27 CB band Mobile Transceiver body 1 x Speaker Microphone 1 x Plastic Bracket 1 x Fuse 2 x Fixing Screw sets 1 x ENG USERS Manual If you have related videos, please share with us, please contact us

SW-33MARK2 SURECOM SW-33 markII 125-525 Mhz Mini Digital VHF/UHF Power & SWR Meter Features: 1 VSWR. Forward power direct digital readout, without any calibration. 2. Maximum measurable power range up to 100W. 3. 3 seconds check your antenna SWR , also check your radio RF power watt. ​4.Easy to install handheld Radio Manual Wholesale Quotation Shopping Features: 1 V.S.W.R. Forward / Reflected RF power direct digital readout(Ver.130 only), without any calibration. 2. Maximum measurable power range up to 100Watt. 3. Fast check of antenna S.W.R. and Radio RF power watt in 3 seconds only 4.Easy to install handheld Radio Specifications: Measurable power range: 0.1-100 Watt Maximum power: 100Watt Accuracy: mean + / - 5%~10% S.W.R. measurable minimum input: 3 Watt (5 watt is best) * Not for the D.M.R. digital radio. 1.Features function Power On / S.W.R .Mode : Press red button and hold 3 sec. ( first status is "S.W.R. "mode,) show > Press red button -" FWD " RF Power mode , show > Press red button -" REV " RF Power mode , show > Power Off : Push red button and HOLD 2.How to Measure RF Power output from transmitter (Pic.3) Press red button -switch on Mode S.W.R. And then press red button again to "FWD Power " mode. Display will show: Connect the "TX" to Radio TX output . Connect the "ANT/50 Ohm Load" to Dummy Load !Caution : Please use correct dummy load , High RF power output will damage the dummy load. * Power Watt - Testing frequency: VHF 145.000 / UHF 430.000 3. How to Measure S.W.R. from Antenna (Pic.4) Press red button " Power on " > "S.W.R. "mode. Display will show: V Connect the "TX" to Radio output. Connect the "ANT/50 Ohm Load" to ANTENNA Test Results show 1.00 to 1.50 , -Mean the antenna is very good for this frequency. Test Results show 1.50 to 9.00 , -Mean the antenna is not good for this frequency. Test Results show 10.0 to 19.99 , --Mean the antenna is very bad for this frequency. ​ Package Contents 1x SW-33 markII SWR/POWER METER 1x English User Manual 1x USB charger cable 1x USB AC adapter 100-240 V Version information: VER．281 Production on 2017-2019 (Power on without show version ) VER. 291 Production on 2019-2020 ( Power on show "291") VER.130 Production on 2020-2021 ( Power on show " 130") If you have related videos, please share with us, please contact us

SE-01 The SE-01 PTT button activates computer software that communicates to the phone or tablet and activates the PTT of the PoC App. directly. The SE-01 PTT works just like a normal PTT, push to talk and release to listen. There is no battery to charge and the SE-01 does not add any battery drain to your phone or tablet (the SE-01 has a small disposable battery you can easily change, but it will last from 1 to 2 years so it is very inexpensive to operate.) Using the SE-01 is super easy! Select 'External PTT' in your PoC App (not every PTT App supports external PTT, so check first.) Plug in the SE-01, and simply press the PTT to start talking. There is nothing to pair, nothing to charge. Couldn't be much easier Features: POC Audio Accessory Solution For Zello App on iOS and Android. Ear for hygeine & all-day comfort. Noise Reduction Knowles Microphone. Front Facing PTT Button. Designed & Engineered in the HONGKONG ​ This is our NEWEST invention for our customers wanting to use PTT apps on cell phones and tablets. Most cell phones and tablets do not support any kind of external Push-to-Talk (PTT) function on their accessory plugs,so users have either had to use the device screen or Bluetooth to make the PTT work. Sometimes it's not easy to push a PTT on the device screen, and Bluetooth can be inconvenient since it needs pairing, battery charging, etc. The SE-01 PTT solves this problem by having the computer software inside! (like phone calling, music playing, photo taking, etc.) Manual Wholesale Quotation Shopping Package Include: 1x SE-01 PTT Controller with Mic 1x 3.5mm MONO Earpiece Set-up wired accessories for Zello Android Depending on the Android device, you may need to disable Google Play Music under applications to prevent the headset hook from bringing up music. If you're using one of the Zello recommended accessories that function as a push-to-talk device, log into your management console and go to Settings > Android > "Enable Use specialized wired PTT speaker-mic or headset" and save. 1. Connect the accessory to your mobile device 2. Open Zello "Options" > "Push-to-talk button" 3. Select "Add Button" on the top right. You'll get a prompt asking you to press the desired button and it will be added as a "Headset hook". 4. Make sure the button is set to "Toggle mode" and that "Handle headset button when in the background" is enabled. Even though it's set to toggle mode, the accessory will work as a push-to-talk mode if it's listed as push-to-talk from the website. If you're using a device not listed, it will most likely only work as Toggle mode. iPhone/iPod/iPad Although Zello does have the option to map a headset hook from an Apple headset, it is not often reliable. Zello does not have the control to maintain the headset hook for PTT control, so the headset button will may sometimes trigger music. To prevent this from happening, make sure you don't have a music app in the background while using Zello. Connect your headset to your iPhone and then follow these steps: 1. Set push to talk button "Action" to "Toggle". (Zello menu>Options>Push To Talk button>Action>Toggle). 2. Make sure you have enabled "Headset/remote control" enabled. 3. Go to Audio settings and make sure you have "Mix with other audio" turned Off (Zello menu > Options > Audio > Mix with other audio > Off ). If you have related videos, please share with us, please contact us

As a business you will routinely receive requests for your wholesale price list. It helps to have a colour brochure with a price list insert which will save expensive reprinting costs when prices change. This will usually be all the customer requires at this time. The more information you can supply to an initial inquiry, the less likely you are to receive follow up questions.

SR-328 Radio Range Extender,The SR-328 is a multi-function and cheaper device that connects any handheld or mobile radio. By equipment and so on our assemble the build, the new generation trunk-line board, the internal structure design are finer, the outward appearance is more attractive. Besides can provide a the basic repeater function which has following the receiver transmitter, furthermore has the Simple connection, provides the more ideal 2-way radio conversation region for you, causes you maintains the relation in the bigger operating region. This is a radio duplex repeater controller. It is an easy of operation and cost effective and highly flexible platform for setting up bi-direction band duplex repeater with mobile radio and handheld radio. . The SR-328 has 2 audio ports input and out , they are used to connect with mobile and handheld radio. DTMF remote control function with password protection is available in the . User can control the repeater ON or OFF remotely by DTMF. Multi-LED display 2 of radio status , and build-in battery Level. Feature & Specification ​ -Works with most popular handheld radios -Multi- LED display 2 radio status , And controller Battery Level -Real time duplex repeater with link radio -Allows user to change the DTMF remote control password by radio -Operates on both build-in Li-ion battery 72 hours long life operation -External DC 5~24V power supply -DTMF remote control repeater function ON and OFF with password protection -Professional manufacturer low power consumption . Wholesale Quotation Manual Shopping If you have related videos, please share with us, please contact us

SW-33PLUS SURECOM SW-33 PLUS 125-525 Mhz Mini Digital VHF/UHF Power & SWR Meter Features: 1. V.S.W.R. Forward power direct digital readout, without any calibration. 2. V.S.W.R. REW power direct digital readout, without any calibration. 3. Maximum measurable power range up to 100 Watt. 4. 3 seconds check your antenna S.W.R. , also check your radio RF power watt. 5. Easy to install handheld Radio Manual Wholesale Quotation Shopping Features function Push red button and hold 2 sec. to" Power on " and "ALL "mode " LCD display show Push red button -" 90° "mode , LCD display show Push red button -" 180° "mode, LCD display show Push red button -" V.S.W.R. "mode ,LCD display show Push red button -" FW POWER "mode ,LCD display show Push red button and HOLD -" POWER OFF 1.1 How to use Power meter (forward) Push red button -switch on Push red button at four times to mode "POWER meter " ,LCD display show Connect the SMA (mark TX) to Radio output . Connect the SMA to DUMMY Load Caution : Please use correct dummy load , High power will damage the dummy load. 1.2 How to measure SWR? All forms of SWR meters measure SWR, standing wave ratio on a transmitter feeder. Using SWR meter is relatively easy, but one should be able to interpret the results when using it. In general, VSWR and SWR are the same. When using VSWR meters to measure the the performance of a new antenna, always one should prefer to use up to 3W power and a clear channel. The following procedure can be used to use the meter. Push red button at two times to mode "V.S.W.R. meter " ,LCD display show Connect the SMA (mark TX) to Radio output . Connect the SMA (mark Ant) to ANTENNA When the the LCD show 1.00 to 1.50 , 1.0~ 1.5:1 mean the antenna is suit the frequency. When the the LCD show 1.50 to 3.00 ​ , 1.5~ 3.0:1 mean the antenna is not good suit the frequency. When the the LCD show 5.00 to 19.99​ ,5.0~19.99:1 mean the antenna is not suit the frequency. The VSWR meter is connected in the feeder from the transmitter to antenna. For the feeder convenience, SWR meter is located at the transmitter end of the feeder. This helps to monitor the actual VSWR values. One should know, where exactly SWR can be measured. There is always some degree of feeder loss, which has a major effect on the VSWR readings. Feeder loss absorbs power in both directions. When the reflected signal is reduced, there is a high level of feeder loss. The reflected signal gets reduced as a forward signal to the antenna, later it’s reflected back to the transmitter. Since the signal is reduced on its way to the transmitter, an antenna with poor match and high VSWR will be fine at the transmitter. Hence, when a feeder that induces a high loss is used, VSWR is good at the transmitter, but at the antenna, it may be poor. Package Contents 1x SW-33 PLUS SWR/POWER METER 1x English User Manual 1x USB charger cable (Not include Power adaptor) 1x SMA male to SMA male Adaptor ​1x SMA male to SMA female Adaptor 1x SMA female to BNC female Adaptor 1x SMA male to BNC male Adaptor 1x 5-20W DUMMY LOAD for testing / other type of 5W dummy load for testing (random) SWR Formulas and Calculations VSWR can be calculated from various parameters. By definition, VSWR is given as ratio of maximum voltage on the line to the minimum voltage. ​ The same can be expressed in terms of forward and reflected wave voltages. If you have related videos, please share with us, please contact us

Latest News News Title 03 MAR. 23, 2023 I'm a paragraph. I'm connected to your collection through a dataset. Click Preview to see my content. To update me, go to the Data Manager. Read More News Title 04 MAR. 23, 2023 SS10 METER Read More News Title 05 MAR. 23, 2023 I'm a paragraph. I'm connected to your collection through a dataset. Click Preview to see my content. To update me, go to the Data Manager. Read More SW102N MAR. 23, 2023 SF103 FREQUENCY COUNTER Read More SW102S MAR. 23, 2023 SW33 POWER/SWR METER Read More

SW-114 SURECOM SW-114 27-30MHz HF SWR/RF/Field Strength Test Meter Features: 3 function analog meter for SWR , RF power and field strength Indicates the condition of a 50 ohm antenna and coax used for CB operation Tests for SWR or relative power 10 watt and 100 watt switches Forward and reverse switches Manual Wholesale Quotation Shopping Brand SURECOM Model SW-114 SWR :1:1 to 3:1 Frequency : 27-30MHz CB Radio band RF Power : 0-10WATT / 0-100WATT Connector : SO239 Impedance : 52 ohms Item Weight 410g Product Dimensions 120(W) X 60(H) X 65(D)mm Package include : 1x SURECOM SW-114 SWR /POWER METER 1x Field strength Antenna 1x English Manual If you have related videos, please share with us, please contact us

Time Out This page isn’t available right now. But we’re working on a fix, ASAP. Try again soon. Go Back